€1600.00 excl. VAT

PlyoDyne®BASIC is a free-standing basic equipment and intended for 1 user operation in a non-commercial environment.

It requires limited exercise space of approx. 1,75 1 m, preferably in a corner setup.

The equipment delivery includes 1 stable base plate with ball joint, 1 passive (child) safe handle holder to place the handle after training, 1 exercise shaft, 1 complete handle arrangement and a full set of weights.

Recommended setup is a ∅ 25 mm exercise shaft, but it can be freely selected depending on training targets.


PlyoMATRIX® allows for training of the 7 individual training characteristics that can be combined in individual targeted training schedules and goals.

First your body will rediscover its 3D static and dynamic balance when training using a simple stable functional basis with two feet in a closed chain position.

The dynamic movement and proprioception enhance your full 3D coordination: the sense of the relative position of one’s own parts of the body and strength of effort being employed in movement. This is sometimes referred to as the “sixth sense” and can best be described as muscle chains being in constant flow with perfect timing, and so-called power-drifting, and again a true functional motion.

Increasing mobility and flexibility of all tissues including facies sliding in functional muscle chains. The parts in chains with least flexibility are first stretched, and above all the right stretch of passive and active tissue occurs in cooperative function.

The sequence and manner of movements result in an increase of functional central core stability in caudally closed chain. This again leads to cooperating shoulder and arm core stability and simultaneously to a correct transfer of active muscle structures that goes along with a regulated support of passive joint structures and weak tissue. In addition, a special effect area is created with a closed-eyes training increasing the proprioception and neuromuscular facilitation in additional function.

Subject of this training dimension are eccentric and concentric aspects. The extreme level of power needed to convert from an eccentric to a concentric motion, passing through the critical but with the equipment trainable zero force moment, fortifies the ventral strength of the shoulder joint, in full functional patterns. Pure power training is feasible in slow power mode.

Controlling acceleration and deceleration of your movement allows for a super slow velocity training mode. Here you can reach highest levels of fine-tuned forced fast power training. With a clear focus on muscle and weak tissue functional training, especially related to white muscle fibers you protect weak tissues and facies structures.

The latter attribute is the combination of the above-mentioned freely selected adaptable characteristics and speaks for itself. The combination lead to a controlled and reproducible overall effect of a perfectly tuned fusion of power and speed training. There are no limits in defining anaerobe and aerobe results. PlyoMATRIX® offers a highway to success and delivers a security of outcome.


You can train 24/7 at your home with security of outcome whilst you have all features in reach.

Home use

The PlyoDyne®BASIC requires only 1,75x1m exercise area. The highest possible training sequence whenever you want, wherever you want.

Weight set

Weight set consisting of 1 x 25 g, 1 x 50 g, 4 x 100 g, 1 x 0,5 kg, and 4 x 1 kg.

Mobile equipment

One of the smallest training equipment available on the market combining the 7 most important training characteristics, there where you want it.

Maintenance free

All materials have been carefully selected and tested and should, if properly handled, not fail. The equipment is maintenance free, no lubrication required.

1. The grip

The ergonomic grip has been developed to absorb pressure on the hand while exercising. The material is carefully selected silicone that has excellent hygiene, cleaning and wear & tear resistant properties. It has a rough and soft to the touch surface that prevents the handle from sliding out of your hand during exercising.

2. The weight axle

A unique and patented technology enables you to change weights in a 2-step motion sequence. First put the weight clamp in its highest position, then slide the weight along the weight axle to the slot position (2a) and the weight can be removed by moving the weight via the special slot (2A) in a perpendicular movement relative to the axle. Installation of a weight is possible applying the reversed sequence.

3. The weights

One side open perfectly machined marvels: the weights.

4. The weight clamp

In order to secure the weights to their position on the axle, the weight clamp is lowered onto the weight(s) and locked. And put in the position above the slot (2A), and locked here, it allows   weights to be exchanged.

The exercise handle

Plyometrical Uniqueness has been engineered and designed into an esthetic, almost art-like functional handle incorporating industrial grade bearings, and all peripherals needed to exercise to the extreme.

The base

A 10mm strong bright blue powder coated steel plate is the solid but still mobile base of the PlyoDyne®BASIC. Its shape is derived from our corporate logo and refers to the speed-force-interaction graph, the center point of our theoretical concept.
The base will keep the mirror-polished stainless-steel ball joint in a secure and fixed position during exercising and offers a position to store weights not being used. Due to its relatively small dimensions it is the ultimate solution for our home fitness product.

1. The base plate

A stable platform for mounting the mirror polished stainless-steel ball joint and all required peripherals and support structures. Made from 10mm strong bright blue powder coated steel plates.

2. The ball joint

Made from mirror polished stainless steel this astonishing assembly allows for friction and lubrication free motion of the exercise shaft during training. All parts are made with highest achievable tolerances to guarantee a maintenance free operation for decades.

3. The weight holder

For neat and safe storage of unused weights on the base plate.

4. The weights

A new idea results in a genial solution: one side open perfectly machined stainless-steel marvels: the weights.
One set consists of the following weights: 1 x 25 g, 1 x 50 g, 4 x 100 g, 1 x 0,5 kg and 4 x 1 kg.
The grip allows for easy handling and the shape of opening in the grip is derived from our corporate logo and refers to the speed-force-interaction graph, the center point of our theoretical concept.

5. The Passive (child) safe handle holder

After exercise, the handle is stored in the wall-mounted holder. Due to the passive safety, the handle can only be deliberately removed from the holder after an upward movement, which prevents the training axle from accidentally falling over.

Combines 7 training characteristics in 1 appliance

At your own discretion, a choice can be made based on the 7 training characteristics and PlyoMATRIX® will guide you through the process providing your training details.

IQQUIP®'s customer focused service

The iQQuip® team has put great effort in design in combination with latest available production technologies in order to provide highest possible quality and hence reach the highest level of customer satisfaction. All materials have been carefully selected and tested and should, if properly handled, not fail. The equipment is maintenance free, no lubrication required.
If, however a service intervention is required we are committed to solve your service request in a professional and fast manner.