€2350 excl. VAT

PlyoDyne®BASIC is a free-standing basic equipment and intended in a non-commercial environment.

The delivery includes:

  • 1 stable base plate
  • 1 weights storage facility
  • 1 flexible joint
  • 1 passive (child) safe handle holder to place the handle after training
  • 1 exercise shaft ∅25 mm
  • 1 axial movement extender
  • 1 complete handle assembly
  • 1 full set of weights.

An optional “light” version is available for treatment of patients requiring further rehabilitation after the acute treatment phase of their disease or surgery.

Note that you require a minimum ceiling height of 2,5 m to operate the equipment.

PlyoDyne® allows for training of the 7 individual training characteristics that can be combined in individual targeted training schedules and goals.

First your body will rediscover its 3D static and dynamic balance when training using a simple stable functional basis with two feet in a closed chain position.

The dynamic movement and proprioception enhance your full 3D coordination: the sense of the relative position of one’s own parts of the body and strength of effort being employed in movement. This is sometimes referred to as the “sixth sense” and can best be described as muscle chains being in constant flow with perfect timing, and so-called power-drifting, and again a true functional motion.

Increasing mobility and flexibility of all tissues including facies sliding in functional muscle chains. The parts in chains with least flexibility are first stretched, and above all the right stretch of passive and active tissue occurs in cooperative function.

The sequence and manner of movements result in an increase of functional central core stability in caudally closed chain. This again leads to cooperating shoulder and arm core stability and simultaneously to a correct transfer of active muscle structures that goes along with a regulated support of passive joint structures and weak tissue. In addition, a special effect area is created with a closed-eyes training increasing the proprioception and neuromuscular facilitation in additional function.

Subject of this training dimension are eccentric and concentric aspects. The extreme level of power needed to convert from an eccentric to a concentric motion, passing through the critical but with the equipment trainable zero force moment, fortifies the ventral strength of the shoulder joint, in full functional patterns. Pure power training is feasible in slow power mode.

Controlling acceleration and deceleration of your movement allows for a super slow velocity training mode. Here you can reach highest levels of fine-tuned forced fast power training. With a clear focus on muscle and weak tissue functional training, especially related to white muscle fibers you protect weak tissues and facies structures.

The latter attribute is the combination of the above-mentioned freely selected adaptable characteristics and speaks for itself. The combination leads to a controlled and reproducible overall effect of a perfectly tuned fusion of power and speed training. There are no limits in defining anaerobe and aerobe results.


You can train secure and 24/7 at your home with security of outcome.

Home use

The PlyoDyne®BASIC requires limited exercise area preferably in a corner setup.

Maintenance free

All materials have been carefully selected and tested and will, if properly handled, not fail. The equipment is maintenance free, no lubrication required. Use a damp cloth (just water) regularly for cleaning and to avoid dust build up.

1. The grip

The ergonomic grip has been developed to absorb pressure on the hand while exercising. The material is carefully selected silicone that has excellent hygiene, cleaning, and wear & tear resistant properties. It has a rough and soft to the touch surface that prevents the handle from sliding out of your hand during exercising.

2. The weight axle

A unique and patented technology enables you to change weights in a 2-step motion sequence. First put the weight clamp in its highest position, then slide the weight along the weight axle to the slot position (2a) and the weight can be removed by moving the weight via the special slot (2A) in a perpendicular movement relative to the axle. Installation of a weight is possible applying the reversed sequence.

3. The weights

One side open perfectly machined marvels: the weights.

4. The weight clamp

To secure the weights to their position on the axle, the weight clamp is lowered onto the weights and locked. And put in the position above the slot (2A), and locked here, it allows   weights to be exchanged.



This clever design reduces the exercise shaft length, and the required ceiling height significantly and at the same time increases the effective shaft length.

The training handle

Plyometric uniqueness is designed both ergonomically and aesthetically in an almost art-like functional handle with all the peripherals needed to practice to the limit.


The base

A strong base of the PlyoDyne®BASIC. The base will keep the flexible joint in a secure and fixed position during exercising and offers a facility to store weights not being used.


1. The base plate

A stable platform for mounting the flexible joint and all required peripherals. Made from 10mm strong bright blue powder coated steel plates.

2. The flexible joint

Made from high grade polymer this astonishing assembly allows for friction and lubrication free motion of the exercise shaft and guarantees a maintenance free operation.

The bearing that is positioned just above the flexible joint allows for rotation of the exercise shaft and deliberately adds a 3rd mass inertia, beside the mass inertia from the shaft and handle with weights, to the complex play of forces involved in training with PlyoDyne®

3. The weight holder

For neat and safe storage of unused weights on the base plate.

4. The weights

Patented weights set consisting of:

  • 1 x 25 g
  • 1 x 50 g
  • 4 x 100 g
  • 1 x0,5 kg
  • 4 x 1 kg

The opening in the weights, derived from our logo, allows for easy and secure handling.

5. The Passive (child) safe handle holder

After exercise, the handle is stored in the wall-mounted holder. Due to the passive safety, the handle can only be deliberately removed from the holder after an upward movement, which prevents the training axle from accidentally falling over.

6. The axial movement extender

This clever design reduces the exercise shaft length, and the required ceiling height significantly and at the same time increases the effective shaft length. This feature enables PlyoDyne® to be safely operated in rooms with a ceiling hight from 2,5 m.

In addition, the axial movement extender allows an adjustable position of the exercise handle, allowing operation of the device for individuals between 1.6 and 2.0 m.

Of course, we offer solutions in case your body length falls outside this range.

Combines 7 training characteristics in 1 appliance

At your own discretion, a choice can be made based on the 7 training characteristics.

IQQUIP®'s customer focused service

The iQQuip® team has put great effort in design in combination with latest available production technologies in order to provide highest possible quality and hence reach the highest level of customer satisfaction. All materials have been carefully selected and tested and should, if properly handled, not fail. The equipment is maintenance free, no lubrication required.
If, however a service intervention is required we are committed to solve your service request in a professional and fast manner.

Any Questions?

Mail us with any questions you have.

Want a quotation?

Tell us what you need (B2B only).

Become an ambassador?

We gladly come in contact with you.